Welcome to Cutty Shark, Granite Equipment Specialists. Makers of bridge saws, granite saws and equipment including our newest line of machinery - CNC tabletop mills. Locally owned and operated Cutty Shark meets the needs of both small granite shops by providing an precision CNC saw at an affordable price and also the large fabricating shops requiring backup equipment or machines dedicated to one activity. Contact us at (813) 484-0093 or email us at 3219321@gmail.com.
WHY CUTTY SHARK?
One-Touch-Hydraulics for easy slab loading and rotating.
Easily and quickly makes adjustment to any vertical angle for cuts and bevelled edges. Add router for intricate edgings at any angle.
Design in your office, send to the shop by your network, cutting, sink cutouts, polishing and finishing is automatic.
Uses 110 or 120 AC, no need for 3- phase power.
Replacement parts are available off- the-shelf and locally.
Extremely economical! See our pricing page.
Rotate to any angle for precise cuts.
Remove blade and install a bullnose, ogee or angle edge, trim and final polish.
Swivel even a large and heavy piece of stone for any horizontal angle or curved cut.
As you draw with our powerful but user-friendly CAD/CAM software in the Windows environment, you create drawings that automatically become G-Code.
You can even set up the CUTTY SHARK so that you can design your project in the office, as long as your stone is loaded and your machine zeroed, you can send your file through your network. The machine can do the rest without you even going near it!
It is also possible to use different types of heads to hold the cutting tool: Head for straight line cuts with any angle. The diameter of the cutting disc may be over ten inches.
Finger bits and other shapes are readily installed. Poly Chrystaline Diamond router bits are for engraving.
Head to engrave artistic and geometric drawings (grooves for water drainage, decorations for fireplaces, etc. are available.
Because the CNC saw is so accurate, inlaid designs and floors are easier than you could ever imagine.
Powerful function of CAD/CAM allows you to create any kind of profile with no need to use wheels with a special shape. This creates the possibility of using off-the-shelf tooling to make particular cuts. This brings great economical advantages for saving execution time and cost of tools.
The CUTTY SHARK runs on 110 or 120 AC. What this means to you is that you can install the Cutty Shark in any room, building or shop with normal house-type wiring. You could even set it up in your garage! 220 AC-three phase current is not required. This reduces the likelihood of electrical shocks and the necessity of having expensive equipment such as vectors and other hand held machines that require AC to DC converters to protect the workers from electrocution.
By using TTL Logic circuitry, lower voltages may be utilized. Only 1.5 kw of electricity are required to run the Cutty Shark versus 20 kw for the average saw. At 15 cents per kwh, you can see the drop in your production costs immediatately.
A polished finish can be be done in four moves. Saw at 15 inches per minute. 400 grit initial polish at 10 inches per minute. 800 grit intermediate polish at 10 inches per minute. 1200 grit final polish at 10 inches per minute.
Sloped cuts for drain board Finish edges, bullnose, ogee or fancy cuts of your choice
The concept of the Cutty Shark comes from years of experience doing maintenance on all the big, expensive machines costing over $100,000.00. Parts have to be ordered from Germany or Italy, usually with a minimum of 2 to 3 weeks lead time. The Cutty Shark is based on aircraft manufacturing technology and does not require special maintenance, factory trained mechanics or special one-off parts. Any part can be removed and replaced in less than 24 hours, usually in about 15 minutes, causing a minimum of down time.
Call us for a free DVD at (813) 484-0093