|
|
|
|
|
|
One-Touch-Hydraulics for easy slab loading and rotating.
|
|
|
|
Easily and quickly makes adjustment to any vertical angle for cuts and bevelled edges. Add router for intricate edgings
at any angle.
|
|
|
|
Design in your office, send to the
shop by your network, cutting, sink
cutouts, polishing and finishing is
automatic.
|
|
|
|
Uses 110 or 120 AC, no need for 3-
phase power.
|
|
|
|
Replacement parts are available off-
the-shelf and locally.
|
|
|
|
Extremely economical! See
our pricing page.
|
|
|
|
Rotate to any angle for precise cuts.
|
|
|
|
Remove blade and install a bullnose,
ogee or angle edge, trim and final
polish.
|
|
|
|
Swivel even a large and heavy piece of stone for any horizontal angle or
curved cut.
|
|
|
|
As you draw with our powerful but
user-friendly CAD/CAM software in the
Windows environment, you create
drawings that automatically become
G-Code.
|
|
|
|
You can even set up the CUTTY
SHARK so that you can design your
project in the office, as long as your
stone is loaded and your machine
zeroed, you can send your file through
your network. The machine can do the
rest without you even going near it!
|
|
|
|
It is also possible to use different types
of heads to hold the cutting tool:
Head for straight line cuts with any
angle. The diameter of the cutting disc
may be over ten inches.
|
|
|
|
Finger bits and other shapes are
readily installed. Poly Chrystaline
Diamond router bits are for engraving.
|
|
|
|
Head to engrave artistic and geometric
drawings (grooves for water drainage,
decorations for fireplaces, etc. are
available.
|
|
|
|
Because the CNC saw is so accurate,
inlaid designs and floors are easier
than you could ever imagine.
|
|
|
|
Powerful function of CAD/CAM allows
you to create any kind of profile with
no need to use wheels with a special
shape. This creates the possibility of
using off-the-shelf tooling to make
particular cuts. This brings great
economical advantages for saving
execution time and cost of tools.
|
|
|
|
The CUTTY SHARK runs on 110 or 120 AC. What this means to you is that you can install the Cutty Shark in any room, building or shop with normal house-type wiring. You could even set it up in your garage! 220 AC-three phase current is not required. This reduces the likelihood of electrical shocks and the necessity of having expensive equipment such as vectors and other hand held machines that require AC to DC converters to protect the workers from electrocution.
|
|
|
|
By using TTL Logic circuitry, lower
voltages may be utilized. Only 1.5 kw
of electricity are required to run the
Cutty Shark versus 20 kw for the
average saw. At 15 cents per kwh,
you can see the drop in your
production costs immediatately.
|
|
|
|
A polished finish can be be done in
four moves.
Saw at 15 inches per minute.
400 grit initial polish at 10 inches
per minute.
800 grit intermediate polish at 10
inches per minute.
1200 grit final polish at 10 inches per minute.
|
|
|
|
Sloped cuts for drain board
Finish edges,
bullnose, ogee or
fancy cuts of
your choice
|
|
|
|
The concept of the Cutty Shark comes
from years of experience doing
maintenance on all the big, expensive
machines costing over $100,000.00.
Parts have to be ordered from
Germany or Italy, usually with a
minimum of 2 to 3 weeks lead time.
The Cutty Shark is based on aircraft
manufacturing technology and does
not require special maintenance,
factory trained mechanics or special
one-off parts. Any part can be
removed and replaced in less than 24
hours, usually in about 15 minutes,
causing a minimum of down time.
|
